Postingan

Menampilkan postingan dengan label Komputer

Is there a problem with the USB host controller or the root hub?

Is there a problem with the USB host controller or the root hub? If there is a problem with the USB host controller or the root hub, a USB device might not work. To check the status of these devices 1. Open Device Manager. 2. Double-click Universal Serial Bus controllers. 3. Right-click the entry for your USB host controller, and then click Properties. 4. Look in the Device status box to see if it mentions any problems with the device, and then click OK. 5. Click USB Root Hub, and then repeat steps 3 and 4 for this device. Note • To open Device Manager, click Start, click Control Panel, click Performance and Maintenance, and then click System. In the System Properties dialog box, click the Hardware tab, and then click Device Manager. Is there a problem with either of these devices? The Device status box reports a problem with the USB host controller. Or, no USB host controller is listed on the Device Manager tab. The word "unsupported" appears next to the USB host control...

Kesalahan monitor

1.To change the elapsed time before your monitor automatically turns off You must be logged on as an administrator or a member of either the Administrators or Power Users group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure. 1. Open Power Options in Control Panel. 2. In Turn off monitor, click the arrow, and select the time you want. Notes • To open Power Options, click Start, click Control Panel, click Performance and Maintenance, and then click Power Options. • If Turn off monitor is not available, your monitor does not support this feature. • Using Power Options in Control Panel, you can adjust any power management option that your computer's unique hardware configuration supports. Because these options may vary widely from computer to computer, the options described may differ from what you see. Power Options automatically detects what is available on your computer ...

Navigation in MMC

You can move through an MMC console tree by expanding and collapsing branches as needed with the plus sign and minus sign icons, or by clicking and double-clicking with the mouse. The following table lists the keystrokes you can use to move in and between console windows. Keystroke action Result TAB or F6 Moves forward between panes in the active console window. SHIFT+TAB or SHIFT+F6 Moves backward between panes in the active console window. CTRL+TAB or CTRL+F6 Moves forward between console windows. CTRL+SHIFT+TAB or CTRL+SHIFT+F6 Moves backward between console windows. PLUS SIGN (+) on the numeric keypad Expands the selected item. MINUS SIGN (-) on the numeric keypad Collapses the selected item. Asterisk (*) on the numeric keypad Expands the entire console tree below the root item in the active console window. UP ARROW Moves the selection up one item in a pane. DOWN ARROW Moves the selection down one item in a pane. PAGE UP Moves the selection to the top item visible in a pane. PAGE...

Sistem Digit

Gambar
Sistem digit merupakan bidang yang agak baru dalam dunia elektronika kurang lebih sejak awal tahun 50-an, yang pada akhirnya nanti membantu atau menambah perbendaharaan instruksi microprocessor dalam tugasnya mengolah data baik secara perangkat keras (dalam sirkuit internal microprocessor) maupun software (instruksi microprocessor yang dijalankan melalui program atau software). Contohnya secara software, sifat khas XOR, salah satu gerbang logika sistem digit yang diadaptasikan dalam perintah microprocessor tersebut sering dimanfaatkan oleh para programmer untuk tujuan mengosongkan register tertentu (register, variable dalam microprocessor sebagai input atau output dari processor sebelum atau sesudah instruksi dijalankan). Walaupun pengosongan register dapat dilakukan dengan perintah yang tampaknya lebih sederhana, seperti misalnya ‘MOV CX,0′ (untuk mengosongkan register CX), namun pada kenyataanya programmer lebih cenderung untuk menggunakan perintah ‘XOR, CX,CX’, karena lebih singkat ...

Beberapa tips dan registry dibawah ini cuma berlaku buat Windows XP.

Sebelum mengutak-atik Registry, ada baiknya melakukan backup terlebih dahulu. 1. Klik tombol Start > Run. 2. Ketik regedit dan tekan Enter setelah berada didalam jendela Run. 3. Didalam Registry Editor, pilih menu File > Export. 4. Setelah Export Registry File muncul, masukkan nama file ke bagian File Name, misalnya backup-registry dan sebagainya. 5. tekan tombol Save. [b]Mempercepat Update Registry[/b] Tekan tombol Start > Log Off > Log Off. [b]Mengganti Wallpaper[/b] HKEY_CURRENT_USER/Control Panel/Desktop Klik ganda pada wallpaper dan masukkan path gambar yang diinginkan pada Value Data. [b]Mengganti Nama Recycle Bin[/b] HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E} Klik ganda pada option (Default value) dan beri nama baru sesuai yang diinginkan pada Value Data. [b]Memunculkan Rename Pada Recycle Bin[/b] HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}/ShellFolder Klik ganda pada Attributes > Edit Binary Value. Pada Value Data, ganti ang...